Wensar - Cl-ise Ion Selective Electrodes Electrodes Medical Equipment Vendors Suppliers Dealers

ION SELECTIVE ELECTRODES

Price: On Request

Model:

CL-ISE

Brand:

WENSAR

ION SELECTIVE ELECTRODES- CHLORIDE (CL)

Do you wish to get an estimate or quote for ION SELECTIVE ELECTRODES with Model No. CL-ISE from WENSAR or wish to get an estimate of all similar medical device or medical equipment? Please press the link below and sit back and relax while we at Hospytek connect to you with all medical device vendors and medical device brands selling ION SELECTIVE ELECTRODES.

Powered with Hospytek Vendor Module, Our Vendors can submit a quote in less than 5 seconds, you can chat with them to discuss the specification of ION SELECTIVE ELECTRODES by accessing MY ACCOUNT (on the top right corner of your screen) after adding your required details in the form (which will appear once you click the link below).

By clicking below you would:

Get a variety in quality with variety in pricing.
Get contact details of all relevant vendors of ION SELECTIVE ELECTRODES in your email.
Be able to review the vendors through our refined rating system.
Be able to send request for quote for multiple medical devices.
BE ABLE TO SIGN UP WITH HOSPYTEK AS AN END USER FOR ABSOLUTELY FREE.

Call our Expert : 9805259651

BROCHURE DOWNLOAD AS PDF GET FREE QUOTE REQUEST SERVICE

The concentration of Ions and gases in solution may be determined using ion selective electrodes. When a suitable sensing electrode is immersed in a solution containing ions or gases, an electrical potential may develop at the electrode surface due to a selective spontaneous reaction. The magnitude of this potential varies with the concentration of the selected ion or gas ISEs are responsive to concentration of particular ions in the test liquid and are variable-potential electrodes.When measurements are made using an ion meter, by calibrating with various standard solutions, direct readings of the concentration of the ion can be taken.Slope of the electrode depends on the temperature therfore measurements must be taken at a fixed temperature.

SOLID STATE ELECTRODES are as combination electrodes complete with reference electrode. These electrodes incorporate a solid sensing surface made of compressed silver halides, or solid crystalline material.
A solid state electrode develops a voltage due to ion-exchange occurring between the sample and the inorganic membrane. An equilibrium mechanism occurs due to the very limited solubility of the membrane material in the sample.
GAS SENSORS are combination electrodes that detect dissolved gases in a solution. No external reference is required for these electrodes. The sensing element is separated from the sample solution by a gas permeable membrane
A gas sensor works due to the partial pressure of the measured gas in solution. The dissolved gas in the sample diffuses into the membrane and changes the pH in a thin film of unbuffered electrolyte on the surface of the internal pH sensor. Diffusion continues until the partial pressure of the sample and the thin film is the same. The pH change is proportional to the dissolved gas in the sample
STORAGE AND CLEANING It is sufficient to store the electrode in a standard solution during short measuring intervals. In order not to strain the membrane unnecessary, the electrode should be stored dry if it is not used for several days. After the dry storage put into standard solution for 3 - 4 hours for new measurements. Contaminations should be removed with a wet paper towel, dont use organic solvents like acetone.